20
English
PLAYBACK, RECORDING
1
Press POWER / STANDBY to switch on the receiver.
2
Turn SOURCE SELECTOR to select a source.
y
The name of the source is displayed.
• You can select the FRONT AV/GAME input by pressing
FRONT AV (MX 975D only).
3
Start playback of the source as usual.
•
Turn VOLUME to adjust the volume.
y
VOLUME
and the volume level between
0
and
50
is
displayed.
1
Press BASS or TREBLE.
y
BASS
or
TREBLE
and the actual value are displayed
briefly. Then
TURN VOLUME KNOB TO CHANGE
is
scrolled.
2
Turn VOLUME to adjust the bass or treble.
y
BASS
or
TREBLE
and the actual value are displayed.
Note : If
VOLUME
is not turned within 5 seconds or if any
other control is used, the bass or treble adjustment is
switched off.
•
Press
±
SOUND on the remote control to scroll through
the built-in smart sounds:
MOVIE
,
SPEECH
,
MUSIC
,
MULTIMEDIA
and
PERSONAL
. (
PERSONAL
is the
userdefined bass and treble setting.)
y
SMART SOUND
is displayed and the name of the chosen
sound profile is scrolled once if smart sound is on.
•
Press LOUDNESS to switch on or off loudness.
y
LOUDNESS
is displayed if loudness is on.
If you wish to record from a source you must select it with
SOURCE SELECTOR. The incoming signal is reproduced by all
audio and – if the source includes a video signal – video
outputs of the receiver. The sound settings do not affect the
recording.
1
Turn SOURCE SELECTOR (or press FRONT AV – MX 975D only)
to select the source you want to record from.
y
The name of the source is displayed.
2
Prepare the desired recording appliance. It must be
connected to one of the outputs of the receiver.
3
Start recording on the recording appliance.
4
Start the playback of the source as usual.
Note: – The audio and video signal of
VCR IN
is not
reproduced by
VCR OUT
. The same applies to the
audio signal of
CDR/TAPE IN to CDR/TAPE OUT.
–
We recommend not to use the digital output
COAX OUT
of the receiver to record from an analog
source. Use the analog output
CDR/TAPE
instead.
It is possible to connect a digital recorder to the digital output of
the receiver. In this way, all signals coming from the digital
inputs can be recorded directly on the connected audio recorder.
The receiver will also convert all signals coming from the
analogue inputs to the digital output.
The receiver can be used to record digitally a multichannel
surround sound audio signal (Dolby Digital) from, for example,
DVD to CD-R. The receiver will convert the digital multichannel
signal into a stereo signal without loss of relevant sound
information.
Notes: – Do not use the 3D SURROUND feature while making
digital recordings as this will distort the digital
audio signal.
–
When recording a Dolby Digital signal, each track
must be recorded individually.
Recording from the digital output
Recording from a source
Adjusting the sound
Playing a source
