Philips FM-2, Service Manual

Page: 51 / 110

Tools Required
Chapter 6 - Disassembly/Reassembly Guide 39
All part numbers and exploded views of some assemblies are found in
Chapter 7, “Spare Parts”.
Tools Required
Caution
When reassembling, be sure to follow torque-limits instructions. Excessive
torque may damage the plastic screw mountings or case.
The following tools are required:
• small/medium, Phillips-head screwdriver
• A torque-sensitive tool, with a torque range to 1.1 Nm (10 in-lb.); accuracy
±0.1 Nm (±1 in-lb.)
• needle-nose pliers or Tinnerman tool
• 10 mm socket driver (for wheel encoder nut)
• 3/16” socket driver
The rear case assembly consists of a molded plastic case, in which the battery is
stored. The speaker housing is mounted on the back of the rear case assembly,
and also forms the cover for the battery. Through-holes in the case cover are
provided for the rear-panel connectors, that are mounted on the rear connector
board.
Fuses
There are no customer or field-replaceable fuses.