Philips FM-2, Service Manual

Page: 37 / 110

Chapter 4 - Power-up Default Settings and the Service Menu
25
4
Power-up Default Settings and the
Service Menu
Introduction
This section discusses use of the Power-up Defaults Menu to configure power-
on default settings, and the Service Menu to obtain service-related information
about the monitor.
Power-up Defaults Settings
These are parameters which can be changed by the user. The power-up defaults
allow you to create a power-up default for many settings in the monitor. Power-
up defaults are the settings in effect each time the monitor is powered on.
The power-up default settings are configured at the factory prior to shipment.
Some of the parameters are stored when the monitor is powered down, and these
are classified as “saved through power cycle”. The factory default values are
defined in Table 4.
Table 4 Power-Up Default Settings
Parameter Factory Default Saved Through Power Cycle
US trace separation
“0”BPM
No
TOCO Baseline set-point 5 Yes
All alarm settings - Yes
Modem: Initialization string
-----
Yes
Modem: Phone number
-----
Yes