Philips FlatTV Matchline 50FD9955, Owner'S Manual

Page: 8 / 24

8
Use of the remote control
V
No function
¬
Mute button
No function
CH/PR Program selection
To browse through the sources selected.
AV MUTE
To mute the picture or restore it if the plasma display is used
in the
VGA
mode.
When activated a green indicator starts blinking in front of
the plasma display.
q
Picture format
Press the
q
button to switch between the different picture
formats.
Note: do not allow the displayed in 4:3 mode for an extended
period. This can cause a phosphor burn-in.
POWER
BRIGHTNESS CONTRAST
ZOOM OUT ZOOM IN ZOOM ON/OFF
VGA AV1 AV2 AV3
MUTE
AV MUTE
q
1
2
3
4 5 6
7 8 9
0
V
CH/PR
MENU OK
¬
B
BRIG/-
To adjust the brightness level of the picture
CO/-
To adjust the contrast level of the picture
ZOOM ON/OFF
To activate/de-activate the zoom function.
ZOOM IN/OUT
To adjust the zoom factor and to change the magnification of
the picture when zoom is activated.
Note: not possible with a 2.35:1 picture format.
VGA
Press repeatedly to select your computer connected to the
VGA
or to the
DVI
(digital RGB) connector.
AV1, AV2, AV3
Press to select the peripherals connected to one of the
VIDEO
connectors (
AV1
), to the
COMPONENT INPUT
( AV2 ) ( Y/CbPb/CrPr ) or RCrPr/Gy/BCbPb/Hd/Vd
(
AV3
) connectors.
B
To switch to standby or on again (Does not operate when
POWER/STANDBY
indicator of the plasma display is off).
MENU
To switch the menu on/off
Cursor buttons
To select your choice and to alter a selected adjustment.
OK
To activate your choice
2268.1 am 03-12-2003 09:47 Pagina 8