6
EN
d
Navigation buttons ( / / / )
Navigate menus.
e
OK
Confirm an entry or selection.
f
AUDIO SYNC
Change the audio delay.
g
NIGHT MODE
Turn night mode on or off.
h
(Mute)
Mute or restore volume.
i
+/- (Volume)
Increase or decrease volume.
j
/-
Increase or decrease treble.
k
BASS +/-
Increase or decrease bass.
l
SURR. SOUND
Switch to auto, stereo, or 360 surround
sound.
m
AUTO VOLUME
Turn auto volume on or off.
n
SOUND MODE
Select a sound mode.
o
EXIT
Exit a menu.
p
SETUP
•
Access the setup menu.
•
Press and hold to switch to Wi-Fi
protected setup (WPS) mode.
q
COAXIAL/OPTICAL
Switch your audio source to the coaxial or
optical connection.
5 Connect your
SoundHub
This section helps you connect your SoundHub to a
TV and other devices.
For information about the basic connections of your
SoundHub and accessories, see the quick start guide.
For a comprehensive interactive guide, see www.
connectivityguide.philips.com.
Note
•
For identification and supply ratings, see the type
plate at the back or bottom of the product.
•
Before you make or change any connections,
make sure that all devices are disconnected from
the power outlet.
Connect speakers
The speaker cables are color-coded for easy
connection. To connect a speaker to your
SoundHub, match the color on the speaker cable
to the color on the connector.
Speaker position plays a critical role in setting up a
surround sound effect. For best results, place your
speakers and the subwoofer as shown below.