7
English
EN
Wireless subwoofer
The SoundBar comes with a wireless subwoofer.
a
CONNECT
Press to to enter the pairing mode for the
subwoofer.
b
Subwoofer indicator
•
When the power is turned on, the
indicator lights up.
•
During wireless pairing between the
subwoofer and the main unit, the
indicator blinks white quickly.
•
When the pairing succeeds, the
indicator lights up white.
•
When the pairing fails, the indicator
blinks white slowly.
c
AC MAINS~
Connect to the power supply.
3 Connect and set
up
This section helps you connect your SoundBar
to a TV and other devices, and then set it up.
For information about the basic connections of
your SoundBar and accessories, see the quick
start guide.
Note
•
For identification and supply ratings, see the type plate
at the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Charge speakers
If the wireless surround speaker is undocked
from the main unit, its battery level is indicated
by the indicator on the speaker.
•
Light up white: full battery
•
Light up red: low battery level (less than
30% remaining)
•
Flash red: near empty (less than 10%
remaining)
1
Dock your speakers onto the main unit to
charge the speakers.
2
Turn on the main unit.
»
During charging, the indicator on the
speaker lights up amber.
»
When fully charged, the indicator
on the speaker lights up white for
30 seconds.
Summary of Contents for Fidelio HTL9100
Page 2: ......
