background image

15

English

EN

 

Bluetooth version: 2.1 + EDR

Main unit

 

Power supply: 120 V~, 60 Hz

 

Power consumption: 50 W

 

Standby power consumption: ≤ 0.5 W 

•  Speaker impedance: 

•  Woofer: 8 ohm

•  tweeter: 8 ohm

•  Speaker drivers: 2 x 63.5 mm (2.5") woofer 

+ 2 x 25.4 mm (1") tweeter

 

Dimensions (WxHxD): 1035 x 73 x 156 

mm (with 2 surround speakers attached)

 

Weight: 3.9 kg

Surround speakers

•  Speaker impedance: 8 ohm

•  Speaker drivers: 2 x 63.5 mm (2.5") full 

range

•  Dimensions (WxHxD):  

191 x 73 x 156 mm

•  Weight: 0.7 kg/each

Subwoofer

•  Power supply: 120 V~, 60 Hz

•  Power consumption: 30 W

•  Standby power consumption: ≤ 0.5 W 

•  Impedance: 4 ohm

•  Speaker drivers: 1 x 165 mm (6.5") woofer

•  Dimensions (WxHxD):  

200 x 510 x 201 mm

•  Weight: 4.9 kg

Wall mount

 

Dimensions (WxHxD):  

40 x 100 x 26.5 mm

 

Weight: 0.1 kg/each

Remote control batteries

•  2 x AAA-R03-1.5 V 

7 Troubleshooting

Warning

 

Risk of electric shock. Never remove the casing of the 

product.

To keep the warranty valid, never try to repair 

the product yourself. 

If you have problems using this product, check 

the following points before you request service. 

If you still have a problem, get support at  

www.philips.com/support. 

Main unit

The buttons on the SoundBar do not work.

•  Disconnect the SoundBar from the power 

supply for a few minutes, then reconnect.

Sound

No sound from SoundBar speakers.

•  Connect the audio cable from your 

SoundBar to your TV or other devices. 

However, you do not need a separate 

audio connection when:

•  the SoundBar and TV are connected 

through 

HDMI ARC

 connection, or

•  a device is connected to the 

HDMI IN

 

connector on your SoundBar.

•  Reset your SoundBar to its factory settings.

•  On the remote control, select the correct 

audio input.

•  Make sure that the SoundBar is not muted. 

No sound from the wireless surround 

speakers.

•  Wirelessly connect the speakers to the 

main unit (see 'Pair up with the speakers' 

on page 8).

•  Dock the wireless surround speakers into 

the main unit to charge the battery.

HTL7180_F7_UM_V1.1.indb   15

2013/5/14   14:50:01

Summary of Contents for Fidelio HTL7180




















Reviews: