Philips Faxjet 335, User Manual

Page: 25 / 36

25
long the device should ring before the device detects that it
is a telephone call (no fax).
1
Press
MENU
several times until INSTALLATION
appears on the display.
2 Confirm using
o
.
3
Press
o
several times until, e.g. FAX/TEL TIM-
ER:20
appears on the display.
4 Select the desired ring duration in seconds using
u
.
5 Confirm using
o
.
6 You can exit with
j
.
Setting the timer
For the reception mode
PHONE/FAX
or
TAD/FAX
you
can set when the device is to ring before it picks up. This
makes it possible for you to receive faxes silently at night
without getting disturbed.
1
Press
MENU
several times until INSTALLATION
appears on the display.
2
Confirm using
o
.
3
Using
[
select ENHANCED FEATUR. .
4
Confirm using
o
.
5 Press
o
several times until, e.g. SILENT RX: NEV-
ER appears.
6
Using
u
select SILENT RX: DAILY .
7
Confirm using
o
.
8
Enter the time at which the ring tones are to be
switched off (night mode) e,g,
22 00
for 10 pm.
9
Confirm using
o
.
10
Enter the time at which the ring tones are to be
switched on (day mode) e,g,
06 00
for 6 am.
11
Confirm using
o
.
Special settings
Silent fax reception
For the reception mode PHONE/FAX or TAD/FAX you
can set whether the device is to ring before it picks up. This
makes it possible for you to receive faxes silently without
getting disturbed.
1 Press
MENU
several times until INSTALLATION
appears on the display.
2 Confirm using
o
.
3 Using
[
select ENHANCED FEATUR. .
4 Confirm using
o
.
5
Press
o
several times until, e.g. SILENT RX: NEV-
ER
appears.
6
Use
u
to select from the following settings:
SILENT RX: NEVER – Faxes are received with prior
ringing.
SILENT RX:ALWAYS – Faxes are received without
prior ringing.
7
Confirm using
o
.
Receiving faxes manually
Select manual reception under reception mode of the fax
switch (
MANUAL ). The device will not receive faxes on its
own. After picking up the handset, you can start fax recep-
tion manually, by pressing
o
. This setting is useful, when
you want to receive faxes via a modem connected to a com-
puter.
Eavesdropping while connection is
established
You can eavesdrop while the connection is establish.
1 Press
MENU
several times until INSTALLATION
appears on the display.
2
Confirm using
o
.
3 Press
o
several times until, e.g. LINE MONI-
TOR:ON appears on the display.
4
Using
u
select whether the speaker should be
switched on while establishing the connection or not .
5
Confirm using
o
.
Printing lists
Call log
The call log contains the last 50 dialled numbers.
1 Press
MENU
several times until PRINT OUT RE-
PORT appears on the display.
2 Confirm using
o
.
3 Using
u
select PRINT: ID LIST .
4 Confirm using
o
. The caller list will be printed.
Printing transmission report
Printing a Transmission Report
After every transmission, the machine prints out a trans-
mission report. If a transmission error occurs, an error re-
port is printed out. You can switch off printing of the
transmission report.
1 Press
MENU
several times until FAX SET-UP ap-
pears on the display.
2 Confirm using
o
.
3 Using
[
select VARIOUS SETTINGS .
4
Press
o
several times until TX REPORT:ALWAYS
appears on the display.
5
Using
u
: select
TX REPORT:ALWAYS . Transmission report is al-
ways printed after each transmission.
FAILED TX REPORT Transmission report is printed
only after a transmission error
TX REPORT: OFF Printing of the transmission re-
port switched off.
6
Confirm using
o
.
7 You can exit with
j
.