1-6
FEATURES
Playing tracks repeatedly or in random order-MODE
1
Press MODE repeatedly during playback to select either:
–
shuffle all :
All tracks of the disc are played in
random order once.
–
shuffle repeat all :
All tracks of the disc are
played repeatedly in random order.
–
repeat :
The current track is played repeatedly.
–
repeat all :
The entire disc is played repeatedly.
–
shuffle album
(with MP3-CDs only):
All tracks of the current album are played in random order once.
–
shuffle repeat album
(with MP3-CDs only):
All tracks of the current album are played repeatedly in random order.
–
repeat album
(with MP3-CDs only):
All tracks of the current album are played repeatedly.
Your selected mode is marked by
,
,
above the playmodes,
album, shuffle, repeat all.
2
Playback starts in the selected mode after 2 seconds.
3
To return to normal playback, press MODE repeatedly until
repeat
and
shuffle
disappear.
Storing the last position played-RESUME
You can store the last position played. When restarting, playback wil
continues from where you have stopped.
1
Switch the slider to RESUME during playback to activate
resume
.
y
appears above
resume
.
2
Press
9
whenever you want to stop playback.
3
Press
2;
to resume playback.
y
Playback continues from where you have stopped.
• To deactivate RESUME, switch the slider to OFF.
y
disappears from
resume
.
Locking all buttons-HOLD
You can lock all buttons of the set. When you press any key, no action will be
executed then.
• Switch the slider to HOLD to activate
hold
.
y
appears above
resume
and
hold
is displayed. All
buttons are locked. When pressing any key,
Hold
is displayed.
• To deactivate HOLD, switch the slider to OFF.
y
disappears from
resume
or
hold.
FEATURES / ACCESSORIES
ESP and powersaving
With a conventional portable disc player the music
may stop while you are jogging for example. The
E
LECTRONIC
S
KIP
P
ROTECTION protects this set
against loss of sound caused by light vibrations or
shocks. Continuous playback is ensured.
ESP does
not protect the set against damage caused by
dropping !
• Press ESP repeatedly during playback to select either:
y
is shown and ESP is switched on.
y
disappears. Powersaving is switched on.
Belt Clip
1
Align the belt clip as indicated in the illustration and press on the clip to insert its
shaped pin into the hole in the set.
2
Turn the clip clockwise as indicated to lock the belt clip to
the set.
• To detach, gently lift the belt clip at the indicated end and
turn it counter-clockwise.
In-car connections (supplied or optionally available)
Only use the AY 3545or AY 3548 car voltage converter (4.5 V DC, positive pole
to the centre pin) and the AY 3501 car cassette adapter. Any other product
may damage the set.
1
Put the set on a horizontal, vibration-free and
stable surface. Make sure it is in a safe place,
where the set is neither a danger nor an
obstacle to the driver and the passengers.
2
Plug the voltage converter into the
cigarette lighter socket
(only for 12 V car
battery, negative grounding)
, then connect
the wired end with 4.5V DC input socket on the
set.
3
If necessary, clean the cigarette lighter socket to obtain a good electrical
contact.
4
Turn down the volume and connect the adapter cassette plug to LINE OUT/
p
on the set.
5
Carefully insert the adapter cassette into the car radio’s cassette compartment.
6
Make sure the cord does not hinder your driving.
7
Start playback on the set and adjust the sound with the car radio controls.
•
Always remove the voltage converter from the cigarette lighter socket
when the set is not in use.
Note: If your car radio has a LINE IN socket, it is better to connect the set to this
jack instead of using the cassette adapter. Connect LINE OUT /
p
of the
set with the LINE IN jack of your car radio with an appropriate cable.
3:14
1
2
4.5V DC
12V DC
INSTRUTION FOR USE