POWER SUPPLY/LINE OUT
9
Only use the AY 3170 power adapter
(4.5 V/300mA direct current, positive pole to the
center pin). Any other product may damage the set.
1
Make sure the local voltage corresponds to the
adapter’s voltage.
2
Connect the power adapter to the 4.5V DC jack
of the player and to the wall outlet.
Note: Always disconnect the adapter when you are not using it.
You can connect the CD player to an additional
appliance, E.g. amplifier, radio cassette recorder, etc.,
with a LINE IN jack.
1
Turn down the volume on the additional appliance.
2
Connect an audio signal cable (not supplied,) to the
LINE OUT jack of the CD player and the CD IN, AUX
IN or LINE IN jack of the additional appliance.
3
To adjust the sound and volume, use the controls on
the connected appliance.
Line out
MODE
CD REWRITABLE COMP
ATIBLE
MAGIC ELECTR
ONIC SKIP
PROTECTION
Power adapter
(supplied or optionally available)
English
0
EXP101/17 eng 28/11/00 8:56 Page 9
