Philips ENVISION P851 Service Manual Download Page 7

Page: 7 / 53

LCD Color Monitor ENVISION P851

3.3 Adjusting the Picture

OSD Settings

1.Press the MENU-button to activate the OSD window.

2.Press+ or - to navigate through the functions. Once the desired function is highlighted, press the MENU-buttonto

activate it.If the function selected has a sub-menu, press or again to navigate through the sub-menu functions.Once

the desired function is highlighted, press MENU-button to activate it.

3.Press+ or - to change the settings of the selected function. To exit and save, select the exit function. If you want to

adjust any other function, repeat steps 2-3.

4.OSD Lock Function: To lock the OSD, press and hold the Menu button while the monitor is off and then press

power button to turn the monitor on. To un-lock the OSD - press and hold the Menu button while the monitor is off

and then press power button to turn the monitor on.

5.Eco Mode and DCR hot key : Press the Eco key continuously to select the Eco mode of brightness and DCR on

when there is no OSD ( Eco mode hot key may not be available in all models).

6.4:3 or wide image ratio hot key: When there is no OSD, press + continuously to change 4:3 or wide image ratio. (If

the product screen size is 4:3 or input signal resolution is wide format, the hot key is disalbe to adjust.)

7.Auto configure hot key: When the OSD is closed, press Auto button will be auto configure hot key function .

Summary of Contents for ENVISION P851






















































Search results

Summary of Contents for ENVISION P851

Reviews:

Related manuals for ENVISION P851

Brands by name

Popular brands

Philips ENVISION P851, Service Manual

Search results

Summary of Contents for ENVISION P851

Reviews:

Related manuals for ENVISION P851

Brands by name

Popular brands