Philips EasySuite 32HFL3008D/10 Installation Manual Download Page 53

 

52 

 

Note: Extra channels can contain some movie channels or sport channels like: HBO, Comedy Central, Sky Sport.  

Package 2:  

In this package you can add channels which will be activated with a different MyChoice pin code.  

This package can contain 

“Free channels”,

 “

Package 1” 

and another few channels which will be available 

only if the pin code is valid for Package 2.  

Few configurations possible are:  

Package 2 = Free ch VIP Channels  

Note: VIP channels can contain channels which are included in Package 1 and a few extra.  

Package 2 = Free ch Package 1 + VIP Channels  

 

Each package can be configured independently without having any influence on other packages, but you 
have to keep in mind that after activation the TV will show only the channels which are ticked for this 
package.  

Press 

“HOME” button 

to exit the 

[Professional menu]

 and store all settings.  

5.

 

Check the MyChoice functionality. 

 

Power ON the TV and wait to see the Switch on channel.  Press the MyChoice button on the remote control. 
The following window will appear on TV: 

 

 

Enter the pin code received from the website or generated with a scratch card. After entering the pin code press OK 
to submit the code.  

If the pin code is correct, the following message will be displayed. Also the message will display the remaining 
viewing time. 

 

After few seconds the message will disappear and the channel grid will pop up showing all channels available. The 
MyChoice channels will have a star inside the box.  
 
If you enter an invalid pin code or an expired pin code the following message will be displayed.  

Summary of Contents for EasySuite 32HFL3008D/10

























































Reviews: