background image

 

 

 

1.

 

Requirements before starting the installation 

 

 Before starting the installation, make sure that you have everything you need at hand.  

 

Master remote control 22AV8573 

Standard remote control 

 

 

 

 USB stick 

 

A few key points you need to know.  

1.

 

Fixed High Security, this means that the menu is only accessible with the Setup remote. (Green/yellow). 

2.

 

The key sequence ‘3,1,9,7,5,3, MUTE’ does 

not 

activate Prison Mode menu. 

3.

 

After configuration the TV needs a restart. 

For cloning settings from one TV to another TV, you will need to have a USB stick. This stick needs to be formatted as 
FAT32 and should be empty. 

Always check if the software version on the TV is the latest one. You can do this by using the Master remote and 
press the recall button. On page 2.1 – Current Main Software, you can see the version the set is using.  

The latest software can be downloaded by going to this link.  

http://www.philips.com/support

  

Here you can enter the model number and check the latest version available.  

Check if the software version present on TV is identical with the one from the website. If not please download the 
latest version from  the  website  and unzip  it  on  a  USB key. The USB key must  be  formatted  FAT32 and preferably 
empty to avoid an accidental upload of the wrong settings and software. Follow the instructions on how to upgrade 
the software. 

If the software version from your TV is identical with the one available on the website it is not necessary to upgrade. 

Summary of Contents for EasySuite 19HFL3233D/10












Reviews: