background image

Philips Sound Solutions 

Dynamic Edge™ Soundcard User’s Guide 

33

BEFORE REQUESTING SERVICE... 

Please check your owner’s manual before requesting service. Adjustments of the controls 
and/or procedures covered in the manual may save you a service call. 

TO GET WARRANTY SERVICE IN U. S. A., PUERTO RICO, 

OR U. S. VIRGIN ISLANDS... 

A Return Merchandise Authorization (RMA) number must be obtained by calling (800) 835-
3506. 

 

Write the RMA number conspicuously on the outside of the product carton. Ship the product in 
its original carton and packaging material prepaid to the Philips repair center listed below. If you 
do not have the original carton and packaging material, call the number above. Philips will 
advise you on proper packaging and shipping procedures. Charges to ship the product to the 
repair center are the customer’s responsibility. After repair/ replacement, the return product 
shipment is made by Philips. 

The repair center may keep defective parts. 

Repair Center Address:  Philips Electronics 

1001 Snapps Ferry Rd 

Greeneville, TN 37745 

 

Make sure you write your name, address, RMA number, and model number in at least two 
places on the package.  The RMA desk will provide returning shipping address. 

(In U. S. A., Puerto Rico, and U. S. Virgin Islands, all implied warranties, including implied 
warranties of merchantability and fitness for a particular purpose, are limited to the duration of 
this expressed warranty. But, because some states do not allow limitations on how long an 
implied warranty may last, this limitation may not apply to you.) 

 

We recommend that you print a copy of this warranty for your records and record below the 
model and serial numbers found on the product. 

 

MODEL No. ________________________________________________ 

 

SERIAL No. ________________________________________________ 

 

This warranty gives you specific legal rights. You may have other rights which vary from 

state/ province to state/ province. 

 

For more information write to: Philips Customer Care Center, P. O. Box 520890, Miami, FL 
33152

 

Summary of Contents for Dynamic Edge 4.1 PSC604 with PSA2








































Reviews: