English
EN
15
Get
st
ar
ted
Turn on Progressive Scan
Connect a progressive scan TV with
component video sockets (see chapter
‘Connect video cables - Option 2: Connect to
component video sockets’ for details).
1
Turn on the TV to the correct viewing
channel for this DVD player.
2
Press
SETUP
.
3
Press
B
repeatedly to select
[ Video Setup
Page ]
.
4
Select
[ Progressive ]
>
[ On ]
, then press
OK
.
A warning message is displayed.
Video Setup Page
Picture Setting
TV Display
TV Type
Progressive
On
Off
HD JPEG
HDMI Setup
5
To proceed, select
[ OK ]
and press
OK
.
The progressive setup is complete.
Note
If a blank/distorted screen is displayed, wait for 15
•
seconds for the auto recover.
If no picture displayed, turn off the progressive scan
•
mode as follows:
1) Press
Z
to open the disc compartment.
2) Press the
numeric button ‘1’
.
6
To exit the menu, press
SETUP
.
7
You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
The progressive scan setting will not be available
•
when the HDMI video signal is detected.
During play, when progressive scan mode is on for
•
both this DVD player and the TV, distorted picture
may display. Turn off the progressive scan feature on
both this DVD player and the TV.
dvp5388K_51_en.indd 15
dvp5388K_51_en.indd 15
2009-10-13 17:34:26
2009-10-13 17:34:26