10
Note
Philips does not guarantee 100% interoperability with all
•
HDMI CEC devices.
5 Play
Play a disc
Caution
Do not place any objects other than discs into the disc
•
compartment.
Do not touch the disc optical lens inside the disc
•
compartment.
1
Press
PUSH TO OPEN
to open the disc
compartment.
2
Load a disc with its label facing up.
3
Close the disc compartment and start disc
play.
To view disc play, turn on the TV to the
•
correct viewing channel for this product.
To stop disc play, press
•
.
Note
Check the types of discs supported (see “Specifications”
•
> “Play media”).
If the password entry menu is displayed, enter the
•
password before you can play the locked or restricted
disc (see “Adjust settings” > “Preferences” >
[Parental
Control]
).
If you pause or stop a disc, the screen saver appears after
•
5 minutes of inactivity. To deactivate the screen saver,
press
DISC MENU
.
After you pause or stop a disc and no button is pressed
•
within 15 minutes, this product automatically switches
to standby.
Play video
Note
Some operations may not work with some discs. See the
•
information accompanying the disc for details.
Control video play
1
Play a title.
2
Use the remote control to control the play.
4
Select
[Progressive]
>
[On]
, then press
OK
.
A warning message is displayed.
»
5
To proceed, select
[Ok]
and press
OK
.
The progressive setup is complete.
»
Note
If a blank/distorted screen is displayed, wait for 15
•
seconds for the auto recovery.
If no picture is displayed, turn off the progressive scan
•
mode as follows:
1) Press
•
to open the disc compartment.
2) Press the
•
Numeric button ‘1’
.
6
Press
SETUP
to exit the menu.
7
You can now turn on the progressive scan
mode on the TV (refer to the TV user manual).
Note
During play, when the progressive scan mode is on for
•
both this product and the TV, distorted picture may
display. In this case, turn off the progressive scan feature
on both this product and the TV.
Use Philips EasyLink
This product supports Philips EasyLink which uses the
HDMI CEC (Consumer Electronics Control) protocol.
You can use one single remote control to control
EasyLink-compliant devices that are connected
through HDMI connectors.
Note
To enable the EasyLink feature, you must turn on the HDMI
•
CEC operations on the TV and on other devices connected
to TV. Refer to the TVs/devices manual for details.
One-touch play
1
Press
the
STANDBY
button to turn on this
product.
The TV (if supports one-touch play)
»
automatically turns on and switches to the
correct video-in channel.
If a disc is loaded in this product, disc play
»
automatically starts.
One-touch standby
1
Press and hold the
STANDBY
button on the
remote control.
All the connected devices (if the device
»
supports one-touch standby) automatically
switch to standby.
EN
'93BB80BERRNLQGE
30