12
EN
Connect to analogue stereo system
AUDIO IN
1
Connect the audio cables (not supplied) to
the
AUDIO OUT L/R
sockets on this
DVD player and the audio input sockets
on the device.
Tip
You can optimise the audio output (see chapter
•
‘Adjust settings’ -
[ Audio Setup ]
>
[ Analogue
Output ]
) for details.
Connect USB device
1
Connect the USB ash drive to the
(USB) socket on this DVD player.
Note
This DVD player can only play/view MP3, WMA,
•
DivX, JPEG or WMV les that are stored on such
devices.
Press
•
to access the content and play the les.
Connect to power outlet
Warning
Risk of product damage! Ensure that the power
•
supply voltage corresponds to the voltage printed on
the back or the underside of the DVD player.
1
Connect the power cord to the power
outlet.
The DVD player is ready to be set up
for use.