Philips DVP3360K, User Manual, Page: 11 / 45

English
EN 11
Conne
c
t
Route audio to other devices
Route the sound from this DVD player to other
devices to enhance audio play.
Connect to digital ampli er/receiver
DIGITAL IN
COAXIAL
DIGITAL
OUT
1
Connect a coaxial cable (not supplied) to
the COAXIAL/DIGITAL OUT jack on this
DVD player and the COAXIAL/DIGITAL
input jack on the device.
Tip
You can optimize the audio output (see chapter
•
‘Adjust settings’ - [ Audio Setup ] > [ Digital Audio
] ) for details.
Connect to analog stereo system
AUDIO IN
1
Connect the audio cables (supplied) to the
AUDIO OUT L/R jacks on this DVD
player and the audio input jacks on the
device.
Tip
You can optimize the audio output (see chapter
•
‘Adjust settings’ - [ Audio Setup ] > [ Analog Output
] ) for details.
Connect USB device
1
Connect the USB ash drive to the
(USB) jack on this DVD player.
Note
This DVD player can only play/view MP3, WMA,
•
DivX or JPEG les that are stored on such devices.
Press
•
to access the content and play the les.
Connect to power outlet
Warning
Risk of product damage! Ensure that the power
•
supply voltage corresponds to the voltage printed on
the back or the underside of the DVD player.
1
Connect the power cord to the power
outlet.
The DVD player is ready to be set up
for use.