27
Ad
ju
st
se
tt
in
g
s
[ Digital Audio ]
Select the setting based on the digital
ampli er/receiver that is connected
through the digital jack.
[ Digital Output ]
•
– select the type of
digital output.
Option
Description
[ Off ]
Disable digital output.
[ All ]
The device supports
multi-channel audio
formats.
[ PCM Only ]
The device is not capable
of decoding multi-channel
audio. Audio is
downmixed to two-
channel sound: see
[
LPCM Output ]
setting.
[ LPCM Output ]
•
– select the LPCM
(Linear Pulse Code Modulation) output
sampling rate.
Option
Description
[ 48kHz ]
For discs recorded at
sampling rate of 48 kHz.
[ 96kHz ]
For discs recorded at the
sampling rate of 96 kHz.
Note
[ LPCM Output ]
•
setting is only available if the
[ Digital Output ]
is set to
[ PCM only ]
.
The higher the sampling rate, the better the sound
•
quality.
[ Volume ]
Set the default volume level when you play
a disc.
Press
1. OK
.
Press
2.
b B
to set the volume.
Press
3. OK
to con rm and exit.
[ Sound Mode ]
Select a preset sound effect to enhance
the audio output.
[ 3D ]
•
– select a virtual surround sound
effect that is produced from the left and
right audio channels.
[ Movie Mode ]
•
– select a sound effect
for movies.
[ Music Mode ]
•
– select a sound effect
for music.
[ Speaker Setup ]
When you connect a speaker system, you
can optimize surround output for the
connected speakers.
[ Front Speaker ]
•
Option
Description
[ Large ]
Produce low frequency
signal below 120 Hz.
[ Small ]
Cannot produce low
frequency signal below
120 Hz.