Before Operation (Continued) - DVD part
20
LOCK (Parental Control)
Rating
Movies on DVDs may contain scenes not suitable for
children.Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc.These scenes are rated from 1
to 8, and alternatively, more suitable scenes are available
for selection on some discs. Ratings are
country dependent.The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
1
Select “Rating” on the “LOCK” menu then press
2
.
2
To access the Rating, Password and Area Code features,
you must input the 4-digit security code you created. If
you have not yet entered a security code you are
prompted to do so.
Input a 4-digit code and press
OK
. Enter it again and
press
OK
to verify. If you make a mistake before
pressing
OK
, press
CLEAR
and enter 4-digit security
password again.
3
Select a rating from 1 to 8 using
3
/
4
buttons.
Rating 1-8:
Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
Unlock:
If you select Unlock, Parental Control is not
active.The disc will play in full.
Note
:
If you set a rating for the DVD+VCR, all disc scenes
with the same rating or lower will be played. Higher
rated scenes will not be played unless an alternative
scene is available on the disc.The alternative must have
the same rating or a lower one. If no suitable alternative
is found, playback will stop.You must enter the 4-digit
password or change the rating level in order to play the
disc.
4
Press OK to confirm your rating selection, then
press SETUP to exit the menu.
Password (Security Code)
You can enter or change password.
1
Select “Password” on the “LOCK” menu then press
2
.
2
Follow step 2 of “Rating” on left. “Change” or “New” is
highlighted.
3
Enter the new 4-digit code, then press
OK
. Input it again
to verify.
4
Press
SETUP
to exit the menu.
If you forget your Security Code
If you forget your security code you can clear it using the
following steps:
1
Press
SETUP
to display the Setup menu.
2
Input the 6-digit number “210499” and the security code
is cleared.
3
Enter a new code as described above.
Area Code
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list (See
“Country/Area Code List”, page 39).
1
Select “Area Code” on the “LOCK” menu then
press
2
.
2
Follow step 2 of “Rating” on left.
3
Select the first character using the
3
/
4
buttons.
4
Shift the cursor using
2
button and select the
second character using
3
/
4
buttons.
5
Press OK to confirm your country code
selection.
DVD
DVD
