Philips DVP3350, User Manual, Page: 34 / 40

34 EN
10 Troubleshooting
Warning
Risk of electric shock. Never remove the casing of
•
this unit.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
DVD player, check the following points before
requesting service. If the problem remains
unsolved, register your product and get support
at www.philips.com/welcome.
If you contact Philips, you will be asked for the
model and serial number of your DVD player.
The model number and serial number are on
the back or bottom of your DVD player. Write
the numbers here:
Model No. ___________________________
Serial No. ____________________________
Main unit
The buttons on this DVD player do not work.
Disconnect this DVD player from the •
power outlet for a few minutes, then
connect again.
Picture
No picture.
See TV manual for correct video input •
channel selection. Change the TV channel
until you see the DVD screen.
If this happens when you turn on the •
progressive scan setting or change the TV
system setting, you have to switch to its
default mode:
Press 1.
Z
to open the disc compartment.
Press the 2. numeric button ‘1’ (for
progressive scan) or the numeric
button ‘3’ (for TV System).
Sound
No sound.
Ensure that the audio cables are connected •
and the connected device is turned on to
the correct input source.
No sound during DivX movies play.
The audio codec may not be supported by •
this DVD player.
Play
DivX video les cannot be played.
Ensure that the DivX video le is complete. •
Ensure that the le name extension is •
correct.
The aspect ratio of the screen is not aligned
with the TV display setting.
The aspect ratio is xed on the DVD. •
DivX subtitle are not displayed correctly.
Ensure that the subtitle le name is the •
same as the movie le name.
Select the correct character set.
•
Press 1. SETUP .
Select 2. [ Preferences ] > [ DivX
Subtitle ] in the menu.
Select the character set that supports 3.
the subtitle.