Philips DVP3310, User Manual, Page: 9 / 33

9
Connect video cables
Connect this DVD player to TV to view disc
play. Select the best video connection that the
TV can support.
Option 1: Connect to component video •
jacks (for a standard TV or Progressive
Scan TV).
Option 2: Connect to video (CVBS) jack
•
(for a standard TV).
Note
You must connect this DVD player directly to
•
a TV.
Option 1: Connect to component
video jacks
1
Connect the component video cables
(not supplied) to the Y Pb Pr jacks on this
DVD player and the component video
input jacks on the TV.
If a progressive scan TV is used, you •
may turn on the progressive scan
mode.
Tip
The component video input jacks on the TV
•
may be labeled as Y Pb/Cb Pr/Cr or YUV.
This type of connection provides good picture
•
quality.
Pb
COMPONENT
VIDEO IN
Y
Pr
Pb
COMPONENT VIDEO OUT
Y Pr
3 Connect
Make the following connections to use your
DVD player.
Basic connections:
Video •
Audio •
Optional connections:
Route audio to other devices: •
Digital ampli er/receiver •
Analog stereo system •
Note
Refer to the type plate at the back or bottom
•
of the product for identi cation and supply
ratings.
Before you make or change any connections,
•
ensure that all the devices are disconnected
from the power outlet.
Tip
Different types of connectors may be used to
•
connect this product to your TV, depending on
availability and your needs. A comprehensive
interactive guide to help you connect your product is
available at www.connectivityguide.philips.com.
Connect
English
EN