Philips DVP2856, User Manual, Page: 15 / 24

5
EN
Picture
1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
• [TV System] : Select a TV system that
matches your TV. By default, this setting
matches the common TVs in your country.
• [Aspect ratio] : Select a picture display
format to fit the TV screen.
• [Picture Setting] : Select a predefined color
setting, or customize a setting.
Sound
1
Press .
2
Select
[Setup]
>
[Audio]
to access the
audio setup options.
•
[Analogue Output]
: Select an audio format
for sound output when this player is
connected through the
AUDIO OUT L/R
connectors.
•
[Digital Audio]
: Select an audio format
for sound output when this player is
connected through the
COAXIAL
connector.
•
[Digital Output]
- Select a type of
digital output: [Off] - Disable digital
output;
[All]
- Support multi-channel
audio formats; [PCM Only] - Downmix
to two-channel audio signal.
• [LPCM Output] - Select a LPCM
(Linear Pulse Code Modulation)
output sampling rate. The higher the
sampling rate, the better the sound
quality. [LPCM Output] is enabled only
when
[PCM Only]
is selected under
[Digital Output] .
•
[Volume]
: Change a volume level.
• [Sound Mode] : Select a preset sound effect.
•
[Speaker setup]
: Set the volume level and
distance of each speaker to obtain the best
possible surround sound.
•
[Night Mode]
: Select quiet or full dynamic
sound. Night mode decreases the volume
of loud sound and increases the volume of
soft sound (such as speech).
Note
•
Night mode is only available for Dolby encoded DVD
discs.
Preference (languages,
parental control...)
1
Press .
2
Select [Setup] > [Preference] to access
the preference setup options.
• [Audio] : Select an audio language for video.
• [Subtitle] : Select a subtitle language for
video.
• [Disc Menu] : Select a menu language for a
video disc.
• [Parental Control] : Restrict access to
discs that are encoded with ratings. Input
“136900” to access the restriction options:
When the password field is highlighted,
press OK to enter an input stage, use
numeric buttons on the remote control to
input your password.
• [PBC] : Display or skip the content menu
for VCD and SVCD.
• [Password] : Set or change a password to
play a restricted disc. Input "136900" if you
do not have a password or if you have
forgotten your password
• [DivX Subtitle] : Select a character set that
supports the subtitle of your DivX video.
• [Version Info] : Display the software version
for this player.
• [Default] : Reset all settings to the factory
default, except for the settings for [Disc
Lock] , [Parental Control] and [Password] .
DVP2856_94_UM_EN.indd 5 4/3/2015 2:08:48 PM