Philips DVDR725H, Software Upgrade Instructions

Page: 7 / 12

8
Troubleshooting
Symptom Remedy
The display shows ‘ UP TO DATE’
The system version of your DVD recorder is
already newer than that at the CD-ROM.
Y ou cannot upgrade with this disc.
The display shows ‘ SYS UNSUPP’
Upgrading is not supported for this
configuration.
Contact your Philips Customer Care Center.
The display shows ‘ ERROR ’ or
‘ENGINE ERROR’ procedure
An error occurred during the upgrade. Try once
again. If problem persists, contact your Philips
Customer Care Center.
Some of the system settings have
changed, such as the date or
language preferences.
Reset the DVD Recorder as follows:
Disconnect the recorder from the mains;
Reconnect it while holding the
STANDBY/ON
button pressed until the display lights up.
You will need to redo the installation procedure.
The set does not accept the disc
The upgrade disc may be damaged or not
properly recorded.
- If it is a CD -R you created, make a new disc,
following the guidelines closely.
- If it is a CD -ROM you received from Philips
contact your Philips Customer Care Center.