English
93
System Menu Options
(continued)
Analogue Tuner settings
Press
OK
on the remote control to start the automatic TV
channel search process and replace all previously stored
analogue TV channels. This process may take several minutes.
This feature is only available if you have connected this recorder
to your TV using the EXT1 TO TV scart socket. It allows you
to copy the preset order from your TV to the recorder
(analogue channels only).
1) Press
OK
the remote control to access.
2) Press
OK
to confi rm the message on the TV, ‘TV 01’
appears on the display panel. Use the
TV’s remote
control
to select programme number {1} at your TV, then
press
OK
on the recorder’s remote control.
– If the recorder fi nds the same TV channel as on the TV,
it stores it as ‘P01’. ‘TV 02’ will then appear on the display
panel.
– If no video signal is received from the TV, ‘NO TV’ will
appear.
– If you make a mistake, press
BACK
button to return to
‘TV 01’ setting.
3) Use
the
TV’s remote control
to select programme
number {2} at your TV, then press
OK
on the recorder’s
remote control. Repeat the above steps until you have
assigned all the TV channels.
4) To exit the menu, press
OPTIONS
.
Note:
The Follow TV feature may not work properly on every
TV. In case no channels are matched, please proceed with
manual install.
Use this setting only if the automatic install detected the wrong
tuner signals.
{
Entry mode
} – Select manual search based on channel
allocation or frequency entry
{
CH
(channel),
S-CH
(specifi ed hyperband
channel),
MHz
(frequency) }, then press
OK
.
{
Entry
}
– Use the
alphanumeric keypad 0-9
to
enter the frequency value or the channel
number, then press
OK
and the
Green
button for {
Store
}.
OR
–
Press
the
Blue
button on the remote
control for {
Search
}, once you have
found the correct frequency/channel, press
the
Green
button for {
Store
}.
Auto search
Follow TV
Manual install