Philips DVDR3475, Service Manual

Page: 11 / 69

1-4-2 E7E4AFIS
If an error occurs during the timer recording, one of the following error numbers (40 to 42) or the above error
messages (error number: 1 to 39 and 43 to 46) is displayed on the recording menu after timer recording.
(Once the screen of the program line is exited, the program line for the error will be cleared.)
(No Error Message is displayed for the error No. 40 ~ 42.)
You cannot record on this disc
as Power Calibration Area is
full.
Insert a new disc. 35 PCA is Full. (in REC start) 4
This disc is already finalized.
Release the finalizing for this
disc.
36 It is finalized. (Video Format Disc) 8
Can not record on this disc. Repeat the same operation.
37 Access to Memory Area range outside. -
38 Sector Address is wrong. -
39 BUP writing error of chapter editing. -
You cannot record more than
49 titles on one disc.(The
maximum is 49.)
Delete unnecessary titles. 43 Its recording capacity has been reached. 9
You cannot record more than
254 chapters on the disc.(The
maximum is 254.)
Delete unnecessary chapter
marks.
44 The 254 chapter has been reached. 10
This program is not recordable
in +VR mode. You cannot record copy
prohibited programs.
45 During the CGMS picture input. 12
The disc has no recording
compatibility.
Set “Make Recording
Compatible” to “ON” to convert
the disc.
Set “Make Recording
Compatible” to “ON” to rewrite
the menu,after that you will
record to.
46
Trying to record onto the +VR formatting
disc that had been recorded by the other
recorder.
7
Message Solution
Error
No.
Error Description Priority
Error message is not
displayed.
- Set the timer programming
correctly.
- Set the timer programming
before the start time.
40
- Some portion has not been recorded
because of program overlapping.
- Recording did not start at the start time.
-
Turn the power on and set the
clock correctly then set timer
programming again.
41 Power failed -
Insert the recordable disc. 42 No disc when recording -
Message Solution
Error
No.
Error Description Priority
A program with the error number is grayed out and asterisked on the timer programming list.
error number
Ti
JAN E30 PM PM E1
z
MON JAN/01 2:00AM
1 / 1
mer Programming