Software upgrade
A. Preparation to upgrade software
1) Start the CD Burning software and create a new CD
project (Data Disc) with the following setting:
Label: _____
(No need the label name)
File System: ISO9960
File Name:
DVDR3425_93_V*.CUB
(For
DVDR3425H/93)
DVDR3435_93_V*.CUB
(For
DVDR3435H/93)
Remark: “
*
” stand for the upgraded version number
Note: It is required capital letter for the Label name
& the File System name.
2) Burn the data onto a blank CDR
B. Procedure for software upgrade:
1) Power up the set and insert the prepared Upgrade
CDR.
2) The set will start reading disc & response with the
following display on TV screen:
Software upgrade disc DETECTED, select OK to
start upgrading or CANCEL to exit.
Press OK to start.
3) After press <OK> button to confirm, then screen will
display:
Upgrading software, please wait. Do not switch off
the power……
Please wait patiently, approximately two minutes
later the upgrading will complete.
4) The upgraded disc will automatically out when the
upgrading complete, and the TV will display:
System is successfully upgraded, Remove disc
from the tray and reset system.
5) According to the TV direction, take out the disc and
press OK, the tray door will close, Reset the
system.
C. Read out the software versions to confirm upgrading
1) Power up the set and press <Setup> button on the remote
control.
2) Press <9><9><9><9> <OK> button.
The software version and other information are display on
the TV screen as follows:
Build: XXXXXX-XXXXXXX-XX-XXX
Date: XXXX XX XXXX
Release Version: XXXXX/93_Vxx
Loader Version: VER XXXX
Macrovision version: VXXX
Region Num: XXX
Developer: XXX XX XXXX
D. Replace the new HDD
After finish the replacing of new HDD (Unformatted HDD) in
set and start the set first time, the set will search all hardwares
which are the components of the set automatically and if the set
find the HDD unformatted, it will format it automatically then can
work normally.
Region Code, Software Version& Upgrades
Caution: The set must not be power off during
upgrading, in that case the decoder board will
be damaged entirely.
3-1
http://www.jdwxzlw.com/?fromuser=华盛维修
家电维修资料网，免费下载各种维修资料