Philips DVD737, Service Manual

Page: 7 / 39

3-1
DVD Region code
There is only 1 version of software (for region 2) in this
range, therefore no special re-programming is required.
However, it is possible to change the region code but
do note that selecting a different region code will not
change the existing setting like TV system, output
format, etc.
Region code change is done as follows:
1) Power up the set and open tray.
2) Press <System Menu> button
3) Press <Stop> <Previous> follow by <X> buttons on the
Remote control.
where x = numeric 1 to 6 denoting the regions below:
1 = USA
2 = Europe
3 = Asia Pacific
4 = Australia, New Zealand, Latam
5 = Russia, India
6 = China
Procedure to view Software version and Region code
1) Power up the set
2) Press <System Menu> button on the Remote control.
3) Press <Stop> <Previous> and <Next> buttons on the
Remote control.
3) The TV screen will shows:
VERSION : DP330.4.19 REG : 2
Region code
Application software (backend)
Procedure to upgrade software
1) Power up the set and open tray.
2) Place upgrade CD-ROM onto tray and close it.
3) The FTD on the set [and TV screen] will response and
display the following:
- LOAD [TV screen shows: DISC LOADING]
- DATA [TV screen shows: READ]
- UPGRADE [TV screen shows: UPGRADING
followed by DONE when it is completed]
4) The tray opens for you to remove the CD-ROM and the
set switches to Standby.
5) The whole process should last less than 5 minutes.