Philips DVD634, Service Manual, Page: 14 / 54

Mechanical- and Dismantling Instructions
EN 14 DVD634 /0X1 4.
4. Mechanical- and Dismantling Instructions
Figure 4-1 Dismantling Instructions
DISMANTLING INSTRUCTIONS
See exploded view of DVD634 for item numbers
Mounting Dismounting
Power ON/OFF board 1001
⇒
Remove cable connection
⇒
Remove 2 screws 100
( board to Front cabinet )
⇒
Dismount board
Front control board 1001
⇒
Remove cable connections.
⇒
Remove 5 screws 110
(board to Front cabinet )
⇒
Dismount board
Front cabinet 001
⇒
Remove cable connections
⇒
Open Tray (see instruction below)
⇒
Unlock Tray cover 055 and
close tray
⇒
Unlock Front panel from frame by
releasing successively 4 snaps (2 on the side and 2 on the bottom )
⇒
Place Front panel in front of
the set ( service position )
TopCover 300
⇒
Remove 4 screws 310 and
3 screws 305
⇒
Lift cover from rearside to
remove
DVD Engine 145
⇒
Removes cable connections.
⇒
Open tray (see instruction below)
⇒
Unlock Tray cover 055
⇒
Remove 4 screws 185
(Engine to bottom frame)
⇒
Close
tray
⇒
Lift module up slightly and move
it backward to remove.
Power supply unit 1005
⇒
Remove cable connections
⇒
Remove 2 screws 190
(board to bottom frame)
⇒
Release 2 spacer locking
( board to bottom frame)
⇒
Dismount board
Mpeg board 1002
⇒
Remove cable connections
⇒
Remove 3 screws 255
(skt cinch and scart to back- plate) and 2 screws 290 (Mpeg board to bottom frame)
⇒
Dismount board
CL 26532068_003.eps
010702
Manually opening of tray When it is not possible to open the tray with the EJECT button, the tray can manually be opened. When no disc is loaded, unlock the tray by moving the slide from left to right and pull tray outwards.
When a disc is loaded, unlock the tray by pushing the slide inwards with a screwdriver and pull tray outwards.
Remove 4 screws to remove loader.