25
English
Disc Operations
4
Press
S
, then use the
numeric
keypad (0-9)
to enter the disc number.
➜
"
DISC X
" appears.
5
Press
T
, then use the
numeric
keypad (0-9)
to enter the track number.
➜
"
TRACK X
" appears.
6
Press
OK
to store the track.
7
Repeat steps
4
~
6
to select other discs
and tracks.
8
Press
ÉÅ
to start program playback.
➜
Only the tracks programmed from
audio CDs and VCDs will play.
9
Press
Ç
to stop playback or exit
program mode.
Helpful Hints:
– Pressing OPEN•CLOSE button of the
programmed disc tray will erase the program.
– If you do not press any buttons within 20
seconds, the system will exit programming
mode.
Clearing the program
●
Stop playback, then press and hold
Ç
.
➜
PROG
disappears from the display panel
and "
PROGRAM CLEARED
" appears.
Helpful Hint:
– If the DVD system is disconnected from
the power supply, the program will be erased.
Using the menu bar to
program
IMPORTANT!
You have to turn on your TV and
set to the correct Video In
channel.
(See page 19
“
Setting the
TV
”
.)
1
Stop playback, then press
SYSTEM
MENU
.
➜
The menu bar will appear across the
top of the TV screen.
2
Use the joystick (
1
2
) to select
and
press
4
to enter the program menu.
3
Use the joystick (
1
2
3
4
) to move
within the program menu and use the
numeric keypad (0-9)
to enter the disc
and track number to be programmed.
4
Press
ÉÅ
to start program playback.
➜
Only the tracks programmed from
audio CDs and VCDs will play.
●
In stop mode, press
PROG
on the front
panel to toggle between program on and
off.
To clear the program
●
Stop playback, then press and hold
Ç
.
REPEAT
REPEAT
DISC SKIP
DISC MENU
PROGRAM
SYSTEM MENU
SEATING
ZOOM
PREV
NEXT
STOP
PLAY/PAUSE
OK
1
4
2
3
,
PROGRAM
DISC
TRACK
1
2
3
4
5
6
