Philips DVD 960 Manual Download Page 19

If it appears that the DVD-Video player is faulty, first consult
this checklist. It may be that something simple has been
overlooked. Under no circumstances attempt to repair the
system yourself; this will invalidate the warranty.

Look for the specific symptom(s). Then perform only the
actions listed to remedy the specific symptom(s).

SYMPTOM

• Remedy

NO POWER

................................................................................

• Check if the on/off button on the rear of

the player is set to on.

• Check if both plugs of the mains cord are

properly connected.

• Check if there is power at the AC outlet by

plugging in another appliance.

NO PICTURE

..............................................................................

• Check if the TV is switched on.
• Select the same channel and source on the

TV as on the player.

• Check the video connection.

DISTORTED PICTURE

..............................................................

• Check the disc for fingerprints and clean

with a soft cloth, wiping from centre to
edge.

• Sometimes a small amount of picture

distortion may appear.This is not a
malfunction.

DISC CAN’T BE PLAYED

........................................................

• Ensure the disc label is upwards.
• Clean the disc.
• Check if the disc is defective by trying

another disc.

NO SOUND

................................................................................

• Check audio connections.
• If using a HiFi amplifier, try another sound

source.

DISTORTED SOUND FROM HIFI AMPLIFIER

......................

• Check that the player’s audio L/R output is

not connected to the amplifier’s phono
input.

NO RETURN TO START-UP SCREEN WHEN DISC IS
REMOVED

..................................................................................

• Reset by switching the player off, then on

again.

• Check to see if the program requires

another disc to be loaded.

THE PLAYER DOES NOT RESPOND TO THE REMOTE
CONTROL

..................................................................................

• Aim the remote control directly at the

sensor on the front of the player.

• Avoid all obstacles which may interfere

with the signal path.

• Inspect or replace the batteries.

DISTORTED OR BLACK AND WHITE PICTURE WITH DVD
OR VIDEO CD DISC

..................................................................

• The disc format is not according to the TV-

set used (NTSC/PAL).

NO AUDIO AT DIGITAL OUTPUT

..........................................

• Check the digital connections.
• Check the settings menu to make sure that

the digital output is set to on.

• Check if the audio format of the selected

audio language matches your receiver
capabilities.

BUTTONS DO NOT WORK

......................................................

• Reset by switching the player off, then on

again.

Some problems occur because the      
disc inside the player is dirty. To avoid
such problems clean your discs
regularly with a soft cloth. Wipe the
disc from the center out.

CAUTION

Do not use solvents such as          
benzine, thinner, commercially
available cleaners, or anti-static
spray intended for analog discs.

CLEANING DISCS

BEFORE REQUESTING SERVICE

english 

23

BEFORE REQUESTING SERVICE

Summary of Contents for DVD 960





















Reviews: