manualshive.com logo in svg

Philips DUS804C, Installation Manual, Page: 3 / 4

Share
Download
Philips DUS804C Installation Manual Download Page 3

motion detector coverage at 2.4m mounting height 

 

 

DUS804C Installation Manual Rev I.docx

   3

 

 
 
 

 

 

 

 

 
 
 

 
 
 
 
 

 

photo electric cell mounting location 

• Position the sensor so it “sees” a combination of artificial light and natural 

 Light 

 

• Position the sensor so it is not directly exposed to artificial light or sunlight 

 

• For programming instructions refer to Dynalite Tech Note - Setting up PE  

functions 

 

masking regions from motion detection 

It is possible to reduce the field of view of the DUS804C-DALI from their normal 360

0

 by use of the in-built 

rotating pull out shield. The shield blocks 120

0

 of the field of view, reducing the motion detection field area to 

240

0

. The shield can also be rotated to block any 120

0

 area once the sensor has been installed. 

5.66M 

2.5M 

2.5M 

7.42M 

Lens pattern 

– DUS804C 

Lens pattern 

– DUS804C-SM 

Summary of Contents for DUS804C

Page 1: ...ifications on page 4 for more information When rooms are unoccupied lights can be automatically dimmed or switched off to provide energy savings The unit also incorporates a segmented click up bezel surrounding the motion sensor element This enables a portion of the sensing field to be readily masked to prevent nuisance detection from adjacent doorways or corridors The same sensor provides IR cont...

Page 2: ...n the sensor as to avoid exposing it to direct sunlight and heating cooling sources Position the sensor where pedestrian traffic is likely to walk across the detection zones Note that for the DUS804C coverage area is rectangular see Motion Detector coverage diagram When terminated correctly and powered from the Dynet network the sensors LED will flash for 5 min every time a push button is pressed ...

Page 3: ...rogramming instructions refer to Dynalite Tech Note Setting up PE functions masking regions from motion detection It is possible to reduce the field of view of the DUS804C DALI from their normal 360 0 by use of the in built rotating pull out shield The shield blocks 120 0 of the field of view reducing the motion detection field area to 240 0 The shield can also be rotated to block any 120 0 area o...

Page 4: ... to warranty in that event then a field service call out charge will apply Contact Dynalite or the Supplier for details DUS804C Installation Manual Rev G doc Specifications and design subject to change without notice Philips Dynalite manufactured by WMGD Pty Ltd ABN 33 097 246 921 All rights reserved Dynalite Dimtek DyNet and DLight and associated logos are the registered trademarks of Dynalite In...

Reviews:

No comments