background image

10

Deleting timer programming:

1...8

Select the timer row to be deleted using the number keys 1...or the 

W

or 

V

key

OK

and delete the programmed data using the OK key.

N.B.:

If you accidentally delete a row and wish to reconstitute the original information,
exit the timer menu by pressing the key twice.

N.B.:

The time and date are programmed from the DVB data transmitted by the
channel. Please correct the ‘Time offset’ in the Installation menu when
switching from summer to winter time and vice versa.
CET summer time  = {+2 h}
CET winter time 

= {+1 h}

Please note that some ‘exotic’ channels do not transmit correct time signals.
Check the date and time in the ‘Timer programming’ menu when performing
programming.

3.9 EPG - PROGRAMME INFORMATION (BASIC

NAVIGATOR)

The EPG (Electronic Programme Guide) contains information on current and subsequent
programmes.

The extent of this channel-related information is determined by the individual provider and varies
greatly from one channel to the next. Many channels are also transmitted without usable
additional information (SI data).

This is also the case for the preview. Some providers do not transmit any data; others already
transmit a preview, including additional information, up to a few days in advance.

The EPG information is accessed and quit using the key.

a)

Current and next programme

i

shows the titlestart and end of the current programme
and additional information on the programme, depending on the provider.

i

shows the titlestart and end of the next programme
and additional information on the programme, depending on the provider.

i

to exit channel information again.

E

to exit channel information immediately.

b)

Further preview and additional information

i

Activate the basic navigator, show information on the current programme.

OK

Access the preview.

Depending on the provider, you receive a list of programmes for the current day or for
several days in advance.

You can skip forward or backward to the desired programme row-by-row or page-by-
page using the  

WV

or 

BC

keys.

OK

Once you have selected the desired programme, you can consult additional detailed
information using the OK key. If no additional information is available, you will receive
the relevant message.

If the text of the additional information skips a page, you can skip forward or backward
row-by-row using the 

WV

keys.

Exit the additional information display using the OK key or the key, which displays
the preview again.

c)

Timer programming

The data from the preview can be transferred to the recorder timer using the relevant
key. If a preview is available, then select the desired programme and transfer the data
directly to the timer using the 

G

key.

Summary of Contents for DSR2000




























Reviews: