2
Install
- Insert the two batteries supplied in the remote control
- Plug the receiver’s power cord to the mains and switch the power key
on the back of your receiver on the position “1”
- The satellite receiver is now switched on and starting.This can take
around 30 seconds. Front display indicates “Booting Up”
- From now on you can switch your receiver with the
on or off
(almost instantly).
- The first installation screen appears
- Set your favorite menu language by using the arrow keys (
ui
)
- Set appropriate values for each component
- Press
EXIT
to save and proceed to the second installation screen
- Set appropriate values for each component (note that the settings can
be modified later; for more details refer to the User Manual)
- Press
EXIT
to save your changes and start scanning for channels
- When scanning has been successfully completed, a completion message
is displayed
- Press the green key to exit and save the channels; the receiver will
automatically tune to the first channel in the list
