10
EN
Connect power
Caution
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the
bottom of the unit.
A = "$$
completed all other connections.
G *J$$$ =
adaptor, always pull the plug from the socket. Never
pull the cord.
= =
the DC-IN socket on the back of the
active speaker.
the wall power outlet.
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat,
$"X
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
The battery contains chemical substances, so it should
be disposed of properly.
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
"#$
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert one CR2032 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Note
Before pressing any function button on the remote
" $
control instead of the main unit.
If you are not going to use the remote control for a
long time, remove the battery.
Turn on
In standby mode, press on the back of the
active speaker.
»
The indicator turns amber.
»
The unit switches to the last selected
source.
Switch to standby mode
The unit switches to standby mode in the
following situations.
