Philips DS 3100, Manual

Page: 22 / 32

21
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
This docking speaker can be powered by either
AC power or batteries.
Option 1: AC power
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
•
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
1
Select a plug to install on your adaptor.
2
Connect the AC power adaptor to:
• the power socket at the back of the
docking speaker.
• the wall outlet.
Option 2: Battery power
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Remove batteries if they are exhausted or will not be
used for a long time.
•
Batteries contain chemical substances, so they should
be disposed of properly.
1
Open the battery compartment.
2
Insert 4 x 1.5V AA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
DFU_AUDIO_DS3100_EN_A5_CS5.indd 21 12/08/27 11:47