Philips DreamWear Quick Start Manual Download Page 2

Set up 

your device

Place

 the device 

on a firm, flat 
surface that is 
lower than your 
sleeping position.

Plug

 

the power 

supply of the 
device into an 
outlet. Home 
Screen will appear 
on the display of 
the device.

Ensure

 that one 

end of the CPAP 
tubing is securely 
connected to the 
air outlet port on 
the device.

Water tank

Ramp button

Control dial

Display screen

Air outlet port

Therapy on/off
button

1

2

3

Congratulations, you have received your DreamStation device. 
DreamStation was designed with feedback from hundreds of patients to 
provide a simpler CPAP experience.

A reusable filter comes installed in your DreamStation to filter the air you 
breathe. An optional ultra-fine filter is available to provide additional 
filtration of very fine particles. To use both filters, place the ultra-fine filter 
under the reusable one included with your device and snap them together. 
Put the filter assembly back into the device and swing the door closed.

Reusable and ultra-fine filters

Top-mounted 
hose outlet

Swivel outlet rotates 
180˚ for freedom 
of movement

Simplified design

Easy access to 
water chamber for 
filling and cleaning

Detachable humidifier

The humidifier separates 
to travel even lighter 

Summary of Contents for DreamWear







Reviews: