DPM 9360 - User Manual
14
•
To leave Record Standby and enter Stop mode, either move the 4-Position Switch to the Fast Rewind
position ( ) or press the REC button.
6. When you are finished and do not want to make any further changes to the dictation, press the EOL button
(End-of-Letter) to mark the current dictation as finished (EOL symbol: ). Finishing a dictation via the EOL
button is also possible in Record Standby mode.
The file is closed and a new, empty file is automatically generated. The file number is increased by one.
Recording - DPM 9360/52
DPM 9360/52 enables you to create high-quality digital recordings. To make a recording with DPM 9360/52, do
the following:
1. Move the 4-Position Switch to the REC (Record) position and start dictating.
Speak clearly and keep a distance of approximately 4 inches (ten centimeters) between your mouth and the
DPM.
While DPM 9360/52 is in Recording mode, the Record LED shines permanently red (if Overwrite mode).
Note:
Depending on the setting for the Recording mode, the LED can be either red or green. In Overwrite
mode the LED is red; Overwrite is the default setting for the Recording mode. In Insert mode, the LED is
green.
Note:
In Recording mode, the following buttons are not available: EOL, INS/OVR, DEL, REC
2. Move the 4-Position Switch to the STOP (Stop) position to stop recording.
The Record LED goes out.
3. To continue recording, move the 4-Position Switch to the REC (Record) position again.
4. When you are finished and do not want to make any further changes to the dictation, press the EOL button to
mark the current dictation as finished (EOL symbol: ).
The file is closed and a new, empty file is automatically generated. The file number is increased by one.
Finishing a dictation (EOL)
The EOL button on the DPM marks a dictation as finished (EOL function, End-of-Letter). The EOL button is only
operational if the 4-Position Switch is in the Stop position and recording has been done in the file.
:
The dictation is marked as finished (EOL, End-of-Letter).
Note:
Finishing a dictation via the EOL button is also possible in Record Standby mode.
To mark the current dictation as finished (EOL, End-of-Letter), you have to press the EOL button once. The file is
closed and a new, empty file is created.
Note:
If you have finished a file with the EOL attibute, no further recording is possible in this file. It is also not
possible to delete the file or to delete a section from the file.
Summary of Contents for DPM9360
Page 1: ...DPM 9360 User Manual ...
Page 4: ...DPM 9360 User Manual iv ...
