Connecting The Monitor
6
W2300
Note: If your home has separate UHF and VHF antennas, you will need
a combiner to connect to the TV.
TV to VCR
Follow the steps below to connect a basic antenna or Cable TV signal
to a VCR, and then the VCR to the TV. For information on other
hookups (possible when cable/ descrambler boxes are included), refer
to the owner's manuals for the VCR and the cable converter.
1. Connect your antenna or Cable TV signal to the IN FROM ANT
(enna) plug on the VCR.
2. Connect the OUT TO TV plug on the VCR to the 75 ohm plug on
The TV (connecting cable supplied with the VCR).
3. Refer to the owner's manual included with your VCR for other
possible connections and TV/VCR operating details.
Connecting to DVD/VCD/VCR/CATV BOX
Connect devices with cables provided. Select Composite or S-Video
input from On Screen Display (OSD) Menu. Refer to the Controls and
Indicators section in this document for more information on the OSD.
S-Video Source generally yields better video performance than
composite.
Connect device with cables provided. Select Component input from
OSD Menu. For optimal performance use YPbPr for HDTV formats.
Summary of Contents for Dell W2300
