Advanced settings
29
7
Advanced settings
7.1
Change Recall time
Recall time (or dial delay) is the time delay
by which the line will be disconnected
after you press
r
key. It can be set to
short or long.
The default value of recall time that is preset
in your handset should be the best suited
for your country network and therefore
you should not need to change it.
Press
m
key in idle mode, scroll
:
to
ADVANCE SET
and press
m
OK
, press
m
OK
to enter
RECALL TIME
.
Scroll
:
to
SHORT
or
LONG
and
press
m
OK
to confirm.
• A validation tone is emitted and the
screen returns to previous menu.
7.2
Change the Dial Mode
(country-dependent)
The default value for dial mode that is
preset in your handset should be the best
suited for your country network and
therefore you should not need to change it.
Press
m
key in idle mode, scroll
:
to
ADVANCE SET
and press
m
OK
, scroll
:
to
DIAL MODE
and press
m
OK
.
Scroll
:
to
TONE
or
PULSE
and
press
m
OK
to confirm.
• A validation tone is emitted and the
screen returns to previous menu.
7.3
Set Area Code
This feature is useful when you have
subscribed to Caller Line Identification
service. It allows you to set an area code
in your DCTG240. Once the local area
code is set, the phone automatically filters
the area code for all incoming calls, by
removing the area code for local calls and
retaining the area code for calls from
other areas.
If it is a local call, then only the phone
number of the caller is displayed during an
incoming call or when you call the
number from the call log. If it is a long
distance call, then both the area code and
phone number will be displayed in a
proper format to be dialled out directly
from the call log, or saved into the
phonebook.
Note
You can enter a maximum of 4 digits for
the area code.
You need to subscribe to Caller Line
Identification service to be able to see the
caller’s number or name in the call log.
See “Using the Call log” on page 22 for
details.
Press
m
key in idle mode, scroll
:
to
ADVANCE SET
and press
m
OK
, scroll
:
to
AREA CODE
and press
m
OK
.
Enter the local area code (maximum
4 digits) and press
m
OK
to save.
• A validation tone is emitted and the
screen returns to previous menu.
1
2
1
2
1
2
DCTG240_IFU_EN_for_India.book Page 29 Wednesday, August 1, 2007 12:15 PM
