20
Activate/deactivate alarm timer
1
In standby mode, press
TIMER
repeatedly
to activate or deactivate timer.
»
If timer is activated, is displayed.
Tip
Alarm timer is not available in MP3 LINK
mode.
If CD/USB/iPod/iPhone source is selected,
yet no disc is placed or no USB/iPod/iPhone
connected, the system switches to the tuner
source automatically.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press
SLEEP
repeatedly to select a set period of time
(in minutes).
»
When sleep timer is activated, the
display shows .
To deactivate sleep timer
1
Press
SLEEP
repeatedly until “SLEEP
OFF” is displayed.
»
When sleep timer is deactivated,
disappears.
Listen to external audio
device
You can listen to an external audio device such
as MP3 player through this unit.
1
Connect the audio device.
For audio device with red/white
audio output sockets:
Connect a red/white audio cable
(not supplied) to the
AUX IN
sockets and to the audio output
sockets on the audio device.
7 Other
features
Set alarm timer
This unit can be used as an alarm clock. You
can select CD, Dock, iPod/iPhone playlist, FM or
USB as alarm source.
Note
Make sure that you have set the clock
correctly.
1
In standby mode, press and hold
TIMER
until
[TIMER SET]
scrolls on the display.
2
Press source buttons on the remote
control to select a source: CD, FM, USB,
Dock or iPod/iPhone playlist.
If iPod/iPhone playlist is selected
as alarm source, you need create a
playlist called “PHILIPS” in your iPod/
iPhone.
If no playlist called “PHILIPS” is
created in the iPod/iPhone or no
track is stored in the playlist, the
unit switches to iPod/iPhone alarm
source.
3
Press
TIMER
'
»
The hour digits are displayed and begin
to blink.
4
Press
VOL +/-
repeatedly to set hour,
then press
TIMER
$ '
»
The minute digits are displayed and
begin to blink.
5
Press
VOL +/-
to set minute, then press
TIMER
'
»
VOL
(volume) is displayed and begins
to blink.
6
Press
VOL +/-
to adjust volume, then
press
TIMER
'
EN