8
EN
Store FM radio stations
automatically
When you connect AC power and no FM
stations are stored, the system prompts you to
search and store all the available FM stations.
1
Connect the system to the power supply.
»
[AUTO INSTALL - PRESS PLAY, STOP
CANCEL]
(to auto install, press
;
to cancel, press ) is displayed.
2
Press
to start full scan.
»
The system automatically stores FM
radio stations with sufficient signal
strength.
»
The first preset station is broadcast
automatically.
Tip
•
To exit storing mode, press or .
Set clock
1
In standby mode, press and hold
CLOCK
on the remote control for two seconds.
»
[SET CLOCK]
(set clock) scrolls on
the display.
2
Press / repeatedly to select
whether to synchronize time with RDS
stations.
•
[RDS TIME SYNC [Y]]
: synchronize
time with RDS stations automatically.
•
[RDS TIME SYNC [N]]
: deactivate
time synchronization.
3
Press
CLOCK
to confirm.
»
The 12/24 hour format blinks.
4
Repeat steps 2-3 to set the hour format,
hour and minute in sequence.
Note
•
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
•
If the system is idle for 90 seconds, it exits clock setting
mode automatically.
Turn on
Press .
»
The system switches to the last selected
source.
Tip
•
To select another source, press
SOURCE
repeatedly or
the source selection buttons on the remote control.
Switch to standby mode
Press to switch the system to standby mode.
»
The clock (if set) appears on the display
panel.
