12
EN
Connect the power cable to the wall outlet.
Prepare the remote control
Caution
&
Risk of explosion! Keep batteries away from heat,
%=(! =
To insert the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
;)`<q+ =
3
Close the battery compartment.
a
b
c
Note
&
If you are not going to use the remote control for a
long time, remove the batteries.
&
Do not use old and new or different types of batteries
in combination.
&
Batteries contain chemical substances, so they should
be disposed of properly.
Turn on
Press .
»
The unit switches to the last selected
source.
Switch to standby mode
Press again to switch the unit to standby
mode.
»
) +;=
To switch to Eco power standby mode:
Press and hold for more than two seconds.
»
The backlight on the display panel turns off.
Note
&
If no button is pressed over 15 minutes in standby
mode, this device goes to Eco power standby mode
automatically.
Set clock
1
In standby mode, press and hold
PROG
/
CLOCK SET
for more than two
seconds to activate clock setting mode.
»
[CLOCK SET]
) +
the display, and then the time format
[24H]
and
[12H]
is displayed.
2
Press / to select 24H or 12H, and
then press
PROG
/
CLOCK SET
.
»
The hour digits begin to blink.