13
English
EN
Note
•
If you are not going to use the remote control for a
long time, remove the batteries.
•
Do not use old and new or different types of batteries
in combination.
•
Batteries contain chemical substances, so they should
be disposed of properly.
Turn on
Press .
»
The unit switches to the last selected
source.
Switch to standby mode or Eco
power standby mode
Press again to switch the unit to standby
mode.
»
The clock (if set) appears on the display
panel.
a
b
c
Switch to ECO standby mode:
Press and hold for more than three seconds.
»
The backlight on the display panel turns off.
»
The red Eco Power indicator turns on.
Switch between standby mode and ECO
standby mode:
Press and hold for more than three seconds.
Note
•
The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
Set clock
1
In the standby mode, press and hold
CLOCK/DISPLAY
for over 3 seconds to
activate the clock setting mode.
»
The hour digits are displayed and begin
to blink.
2
Press / to set the hour, and then press
CLOCK/DISPLAY
again.
»
The minute digits are displayed and
begin to blink.
3
Press / to set the minute, and then
press
CLOCK/DISPLAY
to confirm the
clock setting.
Adjust brightness of display
panel
In standby mode, press
DIM
repeatedly to
select different brightness levels.
Find the correct viewing
channel
1
Press
DISC
to switch to disc mode.
DCD3020_58_UM_V1.0.indb 13
9/21/2012 9:47:40 AM
