20
EN
Install the rubber pad
Note
<
For iPad 2, you need to use the supplied rubber pad to
keep it stable.
1
Open the dock, and place the rubber pad
onto the dock compartment as indicated.
2
Load your iPad 2.
Listen to the iPod/iPhone/
iPad
1
Load your iPod/iPhone/iPad.
2
Press the button
DOCK
on your RC.
3
Play the selected track on your iPod/
iPhone/iPad.
< To pause/resume the play, press
.
< To skip to the previous/next audio
track, press / .
< To select a track: press / to
highlight a track, and then press
OK
to
Q
Charge the iPod/iPhone/iPad
When the unit is connected to power, the
docked iPod/iPhone/iPad starts charging.
Tip
<
For certain iPod models, it may take up to a minute
before the charging indication appears.
<
The maximum current of iPod is limited to 1000 mA.
Remove the iPod/iPhone/iPad
1
Unload the iPod/iPhone/iPad from the
dock.
2
Flip down the lid to hide the dock.
