Philips DCB291/12, User Manual

Page: 15 / 20

15
English
Repeat alarm
When alarm rings, press REPEAT ALARM .
The alarm repeats ringing minutes
»
later.
Tip
You can press
•
REPEAT ALARM repeatedly to adjust
the interval (5-30 minutes) to repeat alarm.
Stop alarm ring
When the alarm rings, press the
corresponding
ALARM 1 or ALARM 2 .
The alarm stops but the alarm
»
settings remain.
Set the sleep timer
This unit can switch to standby mode
automatically after a preset time period.
Press
SLEEP repeatedly to select the sleep
timer period (in minutes).
When the sleep timer is activated,
»
appears.
To deactivate the sleep timer:
Press SLEEP repeatedly until [OFF] (off ) is
displayed.
Adjust display brightness
Press BRIGHTNESS CONTROL repeatedly
to select different brightness levels.
6 Other features
Set the alarm timer
You can set two alarms to ring at different
time.
Note
Ensure that you have set the clock correctly. (See
•
“Get started - Set time and date”.)
1
Press and hold ALARM 1 or ALARM 2
for 2 seconds.
»
[AL1]/ [AL2] and the hour digits
begin to blink.
2
Press / or / repeatedly to set
the hour.
3
Press ALARM 1 or ALARM 2 to confirm.
»
[AL1] / [AL2] and the minute
digits begin to blink.
4
Repeat steps 2-3 to set the minute.
5
Repeat steps 2-3 to select whether
to ring alarm for the whole week, on
weekdays, or at weekend.
6
Repeat steps 2-3 to select an alarm sound
source: Buzzer, iPhone, FM, or DAB+.
7
Repeat steps 2-3 to set the alarm volume.
Activate/deactivate the alarm timer
Note
Ensure that you have already set the alarms
•
successfully.
1
Press ALARM 1 / ALARM 2 to view the
alarm settings.
2
Press ALARM 1 / ALARM 2 repeatedly to
activate or deactivate the alarm timer.
The alarm icon appears if the alarm
»
timer is on and disappears if it is off.
EN