Philips DCB-352, User Manual

Page: 18 / 26

18
Manual tune
With this feature, you can tune to a specific
channel/frequency manually. In addition to
antenna orientation for better radio reception,
the optimal reception can also be obtained
with this feature.
1
In DAB mode, press MENU to display the
[Manual tune] option.
2
Press ENTER to confirm the selection.
The display shows a channel and its
»
frequency.
3
Press / repeatedly until the desired
channel/frequency appears.
4
Press ENTER to confirm the selection.
Tip
You can press
•
RDS / DISPLAY to change the service
information on the display.
You can adjust the position of the antenna to obtain
•
the optimal signal strength.
Dynamic Range Control (DRC)
DRC adds or removes a degree of
compensation for the differences in the
dynamic range between radio stations.
There are three levels of compensation:
• [DRC Off] : No compensation
applied. (the default)
• [DRC Low] : Maximum
compensation applied.
• [DRC High] : Medium compensation
applied.
1
In DAB mode, press MENU to enter the
menu options.
2
Press / repeatedly until [DRC]
displays.
3
Press ENTER to enter the sub-menu.
The current DRC level displays on
»
the first line.
4
Press / to select a DRC value
»
[DRC Off] , [DRC Low] and [DRC
High] displays on the second line.
Display DAB information
On the display of DAB broadcasting, the first
line shows station name, and the second line
shows the service information for the current
station. Seven types of service information are
available.
1
Press RDS / DISPLAY repeatedly to
cycle through the display information (if
available).
Dynamic label segment (DLS)
»
Program type (PTY)
»
Ensemble Name
»
Time
»
Channel and frequency
»
Bit rate and audio status
»
Signal error rate
»
Use DAB menu
1
In the DAB mode, press MENU to enter
the DAB menu.
The first setup option
»
[Station list]
displays.
2
Press / to scroll the menu options:
• [Station list]
• [Full scan]
• [Manual tune]
• [DRC]
• [Prune]
• [System]
3
To select an option, press ENTER .
4
Repeat step 2-3 if sub-option is available
under one option.
Full scan
Full scan is used to perform a wide range of
DAB radio search.
1
In the DAB mode, press MENU to enter
the menu options.
2
Press / repeatedly until [Full scan]
displays.
3
Press to confirm the selection.
Full scan starts automatically.
»
EN