English
21
EN
Connect with a Bluetooth device
Note
The operational range between this unit and a Bluetooth device is approximately 10 meters (30 feet).
•
Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth
•
capabilities of the device.
Compatibility with all Bluetooth devices is not guaranteed.
•
Any obstacle between this unit and a Bluetooth device can reduce the operational range.
•
Keep this unit away from any other electronic device that may cause interference.
•
Connect a device for the
fi
rst time
Tip
This unit can memorize the connection information of up to 8 devices.
•
1
Press
BLUETOOTH
to select the Bluetooth source.
2
For an iPhone, load it in the dock for automatic re-connection setup.
3
Press and hold
PAIRING
for more than 3 seconds.
The Bluetooth indicator blinks.
»
4
On the device, set up the Bluetooth connection:
a
Enable Bluetooth to search for other Bluetooth devices. (Refer to the
device user manual on how to enable the function.)
b
When “ PHILIPS DC350” is recognized and displayed, select it to start to
connect.
c
When prompted for a password, enter “0000”.
5
Wait until the Bluetooth indicator turns on.
The connection is complete.
»
To connect more Bluetooth devices
1
Disconnect the currently-connected device. (see ‘Disconnect a device’ on page 22 )
2
Repeat the steps 1-5 in “Connect a device”.
Tip
If no connection is made within one minute, [FAILED] (failed) is displayed on the main unit.
•
DC350_37.indd 21
DC350_37.indd 21
1/7/2009 1:59:06 PM
1/7/2009 1:59:06 PM
Summary of Contents for DC350
Page 2: ...E n g l i s h 3 EN ...
Page 3: ...4 EN ...
