background image

 

15 

None 

No security (not recommended). 
 

Allow Association to 
Mixed Cells 

Check this check box if the access point with which the client adapter is 
to associate has WEP set to Optional and WEP is enabled on the client 
adapter. Otherwise, the client is unable to establish a connection with 
the access point. 

Limit Time for 
Finding Domain 
Controller To 

Check this check box and enter the number of seconds (up to 300) after 
which the authentication process times out when trying to find the 
domain controller. Entering zero is like unchecking this check box, 
which means no time limit is imposed for finding the domain controller.   
Note: The authentication process times out whenever the authentication 
timer times out or the time for finding the domain controller is reached.   
 

Group Policy Delay 

Specify how much time elapses before the Windows logon process 
starts group policy. Group policy is a Windows feature used by 
administrators to specify configuration options for groups of users. The 
objective is to delay the start of Group Policy until wireless network 
authentication occurs. Valid ranges are from 0 to 65535 seconds. The 
value that you set goes into effect after you reboot your computer with 
this profile set as the active profile. 
This drop-down menu is active only if you chose EAP-based 
authentication.   
 

 

Summary of Contents for DAUB-F1

















Reviews: