9
English
EN
1
Press
MENU/OK
on the handset.
2
Select
[Services]
>
[Register]
, then press
MENU/OK
to confirm.
3
Press and hold on the base station for
5 seconds.
4
Enter the system PIN/passcode. Press
REDIAL/C
to make corrections. Then press
MENU/OK
to confirm the PIN/passcode.
Note
•
For models with an answering machine, you hear a
confirmation beep.
»
Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•
If the PIN/passcode is incorrect or no base is found
within a certain period, your handset displays a
notification message. Repeat the above procedure if
registration fails.
•
The preset PIN/passcode is 0000. No change can be
made on it.
Change the remote access
PIN code
Note
•
The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.
1
Press
MENU/OK
.
2
Select
[Answ. Machine]
>
[Remote
access]
>
[Change PIN]
, then press
MENU/OK
to confirm.
3
Enter the old PIN, then press
MENU/OK
to confirm.
4
Enter the new PIN code, then press
MENU/OK
to confirm.
5
Enter the new PIN code again, then press
MENU/OK
to confirm.
»
The setting is saved.
Charge the handset
Place the handset on the charging cradle to
charge the handset. When the handset is
placed correctly on the base station, you hear
a docking tone (see 'Set the docking tone' on
page 19).
»
The handset starts charging.
Note
•
Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
being charged, it is normal.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current battery
level.
Summary of Contents for D4050
Page 2: ......
